home projects contact about


here i have created a template for the 1590BB enclosure for whatever schematic you would like to put inside. i also made a footprint for the alpha 16mm right-angle potentiometers that are pretty much industry standard.

you can download it here

depending on where you place the potentiometers you should have around 8.5-10mm of space underneath them for components. i was able to fit an ic and socket underneath one with the input jacks mounted about 5mm from the floor of the container.

for input jacks i used the template for neutrik NMJ4HCD2, but went with the jacks sold at lovemyswitches. they are more affordable and i saw no difference in quality

feel free to use this if you like! -B